Mahindra and Mahindra
iFuture Systems develops motion controls and Data Acquisition systems on CRIO/LABVIEW platform for End Customer - Mahindra and Mahindra. It is a series of 10 Gauging Stations connected by Conveyors where each part of the engine has to be measured by a contact LVDT probe.
iFuture displays technical capabilities at Automation 2011, Chennai.
iFuture Systems displayed various Automatic Inspection machines including 3D Height and Depth measurement system and Automatic Steering shaft Inspection System.
Poke Yoke system for Clutch Assembly
iFuture implements automated Poke Yoke system for Clutch AssemblyOur team has successfully implemented a poke yoke system to detect presence of all sub assembly and components on a Clutch plate. The system cycle time is 2 seconds per component. Following parameters are checked in one cycle:• Presence of 2 Cir Clips
• Presence of 2 Washers
• Presence of 2 Springs
• Proper assembly and locking of Springs
• Proper assembly of Cir clip
• Orientation of Key
Crack Detection system for Steering Shaft Inspection
iFuture implements Measurement and Crack Detection system for Steering Shaft InspectionOur team has developed and implemented Vision based measurement and visual inspection system. The system can gauge various parameters such as:• Section Diameters of shaft
• Ovality of sections
• Section Lengths of a shaft
• PCD of thread
• Thread quality
• Surface hairline cracks
Vision system for Packing inspection
iFuture Systems develops and implements Vision system for Packing inspectionOur team has successfully developed and implemented vision system for Piston rings packing inspection. The project refers to inspecting and counting the number of Piston rings packed into a polythene cover. Each piston ring is marked with a colored paint on one side and this is significant for identification of its “TOP” orientation. The system checks for all piston rings to bare this mark on the correct side and counts the number of piston rings in each packet. If any ring is found with missing print mark or on the wrong side, the system indicates the same to the operator by means of a Buzzer and a visual alarm.
Introduction to Machine Vision Systems
Camera based inspection systems that help automate high speed, critical quality inspections. Full Story |
Video
Applications of Machine Vision Systems
What you can see and understand, can be replicated to be measured and inspected using Machine Vision! Full Story | Video
Lighting Systems
Embedded Systems and Electronics iFuture Systems has a Mechanical and Electronics development team inhouse. Our lab facilities has the latest tools such as Solid Works, Autocad, Keil and Multi Sim for designing custom applications. We can build a wide range of support products such as Position Sensors, Microcontroller based embedded systems, Signal Conditioners, Industrial Lighting systems, etc Full Story | VideoAnnouncements
Top Headline
Visit our stall at D 52, Automation 2010, Mumbai between 21st - 24th September 2010. Contact us to know more..
Current Openings
Openings for Application Engineers, Electronics Engineers (Hw/Sw), Application Developers, CAD/Solid Works Designers, HR Executive. Please mail your updated resume to
This e-mail address is being protected from spambots. You need...
-
NI's CRIO for Mahindra and Mahindra Gauging stations iFuture Systems develops motion controls on CRIO/LABVIEW platform...
-
iTrainer under mass production iTrainer under production and set to launch in Q4 of FY 2010-2011....
-
Embedded vision application using Industrial PDA for Crack detection. Axle develop hairline cracks that are not visible to naked eye. When...
-
iFuture joins hands with Soliton Technologies Soliton has come forward to share with iFuture team the technical...